Wireless Over-Ear Headphones Audio Technica ATHANC500BT

Wireless Over-Ear Headphones Audio Technica ATHANC500BT


Free UK shipping on all orders 

  • 30 days easy returns
  • Order yours before 2.30 pm for same-day dispatch
Guaranteed Safe Checkout

Wireless Over-Ear Headphones Audio Technica ATHANC500BT

The ATHANC500BT Wireless Noise Cancelling Headphones, these over-ear headphones make sure to cancel noise and bring a good noise reduction. Listening to music, videos, phone calls, in noisy locations, is such a ease with these headphones. These headphones have a feature in which you can switch the mode, allowing for you change from switchable hear-through which allows you to hear voices through your headphones.
A 40-mm driver with a high-fidelity audio reproduction. They use Bluetooth, touch controls built into the earcup for handling all calls. Music or volume adjustments. By Supporting the Audio Technica Connect app, they utilize a better improvement to hear or adjust settings with your device.
This kit comes with a 30 cm USB charging cable, a micro-USB cable, and a stereo mini plug.
Reducing Environmental Noise, with active noise cancelling.
When using Bluetooth and Noise-Cancelling simultaneously, you have a 20 hour battery life
The Sleek and swivel design make the headphones a must-have for travel due to them been lightweight.
Bluetooth connectivity
40 mm drivers for audio reproduction
a 30 cm USB Charging Cable

Type Active noise-cancelling
Driver Diameter 40 mm
Frequency Response 20 to 20,000 Hz
Maximum Input Power 40 mW
Sensitivity 96 dB/mW (When noise-cancellation used)
95 dB/mW (When noise-cancellation not used)
Impedance 32 ohms
Battery DC 3.7 V lithium polymer battery
Battery Life Max. approx. 20 hours (when Bluetooth and noise-cancellation used)
Max. approx. 42 hours (when only noise-cancellation used)
Weight Approx. 180 g (6.3 oz)
Accessories Included USB charging cable (30 cm (12“), USB Type-A/Micro USB Type-B)
Cable (1.2 m (3.9’) / 3.5 mm (1/8”) gold-plated stereo mini-plug, L-shaped)
Microphone Type Electret condenser
Microphone Polar Pattern Omnidirectional
Microphone Frequency Response 50 to 4,000 Hz
Microphone Sensitivity -36 dB (1 V/Pa, at 1 kHz)
Charging Time Approx. 4 hours
Operating Temperature 5°C to 40°C (41°F to 104°F)

Output <4.0 mW EIRP
Operating Range approx. 10 m (33’)
Frequency Band 2.402 GHz to 2.480 GHz
Modulation Method FHSS
Compatible Bluetooth® Profiles A2DP, AVRCP, HFP, HSP
Support Codec SBC
Transmission Band 20 to 20,000 Hz

Additional information